Technical data COBRA Mill desk 5
The small CNC machine placed on your desk
| Technical Data: | |
| Travel X-Axis | 230 mm |
| Travel Y-Axis | 135 mm |
| Travel Z-Axis | 100 mm |
| Travel A-Axis | +/- 28 degree |
| Travel B-Axis | 360 degree |
| Blankholder | 1 Ronde 100 mm |
| Heavy-duty-guide | 15 mm |
| Ball screw | 16 x 4 mm |
| Feed rate max. | 3.000 mm/min |
| Rapid traverse speed max. | 5.000 mm/min |
| Repeatability | < 0,02 mm |
| Automatical tool lenght measurement | +/- 0,01 mm |
| HF milling spindle Jäger | 60.000 U/min 180 Watt |
| Tool diamater max. | 3,0 mm |
| Number of tools max. | 10 Stück |
| PC for input and display | Win7 (32 bit) |
| Screen integrated | Touch 8“ |
| Control | MB-MCS Multi Controller |
| Weight | (95 kg) 80 kg |
| Machine set up measure | 550 x 620 x 600 mm (800 mm) |
| Dimensions in brackets are for machines with wet option | |
Elektricity:
220/230 volt, 50/60 Hz, 1 Phase/MP/NP Mains fluctuations max. +/- 5 %
secured with min. 1 x 16 A fuse
Air pressure:
Cleaned and dry air min. 6,5 bar / Consumption max. 200 l/min
Lubrication of axis:
Lubricating grease for long time lubrication for LM guides
Option:
Wet equipment
Blank changer
